The neck strap, turning into a narrow scarf, fixed with a small loops - such an unusual detail will add any simple model of originality.
For example, dresses fromBurda Style 10/2019 we will consider how to properly execute the decorative strip of the neckline of the front.
Master Class- Special offer
- 1
- 2
- 3
- 4
Step 1. Detail of the right neckline
Fold the bar along in half with the front side inward.
Chop and grind the front short sections and the lower sections to the second transverse mark.
At the beginning and at the end of the line, sew the stitches.
Cut the seam allowances close to the line, at the corners - obliquely.
At the end of the line, seam allowances should be cut close to the stitches.
To turn out a level, to sweep out edges, to iron.
Sweep open sections.
V-neck processing in light fabric products
Step 2. Detail of the left neckline
Fold the bar along in half with the front side inward.
Chop and grind the front sections and the lower sections to the transverse mark.
At the beginning and at the end of the line, sew the stitches.
Cut the seam allowances close to the line, at the corners - obliquely.
At the transverse mark, seam allowances should be cut close to the stitch.
To turn out a level, to sweep out edges and to iron.
Sweep open sections.
Step 3
Sweep the right neckline to the right half of the neckline section from the middle section of the back of the bodice to the transverse mark.
Sweep the left bar to the left half of the neckline section from the middle section of the back of the bodice to the transverse mark.
Cross marks on planks combine with shoulder seams.
Perform shoulder seams on the neckline.
Iron the seam allowances.
Neaten the outer cut of the facing.
Step 4
Cut the neckline with a grinder.
At the same time, pin the grind to the neck cut over the planks with the front side to the front side, aligning the shoulder seams and stitching, fixing the straps.
The secret to perfect edging
Step 5. Perform a sling
Unscrew the neckline on the wrong side, sweep out the neck and iron it.
Unscrew the end of the right neckline along the fold line to the wrong side, pin and grind along the marking.
Sew a fold to the left edge of the neck with small hand stitches.
Pass the end of the left strap through the loops of the right strap.
Neck Processing Methods
Advice
✽ When working with similar decorative details and product elements, always carefully read the instructions.
✽ Transfer all control marks first to the details of the paper pattern, and then to the fabric. This will ensure the correct execution in this case of a decorative strip neck.
✽ Almost any V-neck of a dress, pullover or blouse can be processed with the same bar using the main fabric or fabric of a contrasting color.
Source and illustration: Burda Style 10/2019
