Share
Pin
Tweet
Send
Share
Send
Dog Pluto, Mickey Mouse and his girlfriend Minnie both lull, and bring back sweet dreams.
Pillowcase 50x50 cm
Pillowcase 80x80 cm
Duvet cover size. 200x135 cm
SEWING INSTRUCTIONS
You will need:
Color cotton fabric 150 cm wide: light blue 4.80 m long, pink 0.35 m long.
Solid cotton fabric 150 cm wide: light blue 1.70 m long, pink 0.60 m long.
Ready slanting collar 2 cm wide: light blue 2.20 m long, pink 1.40 m long.
Allowances: At all seams and cuts of 1.5 cm.
Cutting:
Big pillowcase
Light blue plain fabric:
a) 2 pieces of pillowcase size. 80x80 cm
b) grinding 80x27 cm
c) 6 strings 30 cm long, 4 cm wide, finished 2 cm wide.
Light blue color fabric:
d) detail size 50x50 cm.
Duvet cover
Light blue color fabric:
f) a rectangle 400 cm long, finished 200 m long, 135 cm wide,
f) grinding dimension. 135x20 cm
g) 8 stitches 30 cm long, 4 cm wide, finished 2 cm wide.
Little pillow
Pink plain fabric:
h) 2 pieces of pillowcase size 50x50 cm each
j) grinding 50x24 cm
k) 4 ties 27 cm long, 4 cm wide, finished 2 cm wide.
Pink color fabric:
l) detail size 30x30 cm.
Sewing:
Pillowcases
■ Scroll the colored detail of the pillowcase on the wrong side to the top of the pillowcase.Skew the tape onto the outer sections of the colored part. Lay the tape at the corners with oblique folds. Stitch the edges of the inlay.
■ Fold the ties in half. Start on one long and short side. Seam allowances close to the stitch. To turn out ties and to iron. To tie the ties at equal intervals on the fastening edges of the upper part of the pillowcase - on the small pillowcase, 2 ties, on the large - 3.
■ On the grind, allow the stocks on the narrow sides and on one long side to iron on the wrong side, tuck and sew. Edging around the edge
sew stitches to the top of the pillowcase, grabbing the strings. Iron allowances on the pillow and stitch.
■ On the underside of the pillowcase, iron the allowances along the edge of the fastener on the wrong side, tuck and pin. Put the remaining ties under the allowances for the hem; stitch the hem. Lay the ties up, sew along the edge to the edge.
■ Stitch the pillowcase parts face-to-face, leave the edges of the fastener open. Pillowcases to turn out.
Duvet cover
■ Sew the ties and stitching as described for the pillowcase. Stitch the trim to the edge of the clasp of the duvet cover details, while grabbing four ties distributed at equal intervals.
■ Squeeze the other edge of the fastener with the remaining 4 ties.
■ Fold the duvet cover halfway in length with the sides facing inward, grind the side sections. Turn out the duvet cover.
ATTENTION: LAYOUT PLANS (OL) are shown at the top for 150 cm wide fabric
Fold or expand fabric for cutting according to the layout plan.When cutting from fabric in two layers, the front side lies inside. When cutting from fabric in one layer, the front side lies at the top.
Share
Pin
Tweet
Send
Share
Send