Creation

One shoulder tops

Pin
Send
Share
Send

Look at this fashionable asymmetry: hardly another detail can more advantageously emphasize the beauty of the female shoulder!


IN CASUAL STYLE
The raw cutout is twisted into a steering wheel, it turns out very at ease!

YOU WILL NEED Blouse, magic crayon or marker with paint disappearing in the air; threads for sewing.
HOW TO MAKE Try on a blouson, draw a desired cutout on the front with a marker or chalk. Fold the blouse on the inside out, lay it flat on the work surface and cut out along the marked line. Secure the ends of the side and shoulder seams with a few stitches.
Stretch the slices so that they twist. From the cut-off part, cut 2 strips 12 cm long and 5 cm wide. Iron long sections on the wrong side 1 cm wide, then fold the strips to a width of 1.5 cm and iron. Sew the edges.
Place one strip on the shoulder seam on the front side, sew the middle of the strip to the seam of the sleeve. Fold the halves of the strip, lay the ends inward, around the neckline, while the shoulder seam should slightly lighten. Sew the ends of the strip from the inside. Sew the middle of the second strip at a distance of about 3 cm under the cut to the side seam on the front side. Fold the strip in half, wrap the ends inward and sew on.
GLAMOROUS
A masterfully tied knot gives extravagance to the two-tone top.
YOU WILL NEED Blouse (tight-fitting); thin bielastic fabric 90 cm wide, 85 cm long; sewing threads; magical crayon.
HOW TO MAKE Try on a blouseon. Under the chest, mark the transverse line. On the marked line measure the circumference of the body. Take off the blouse. Divide the obtained value by 2. Fold the fabric and cut out 2 panels of the obtained value + 4 cm, length 80 cm, add 1.5 cm to the allowances. Over long cuts and one narrow side, iron the allowances inside out, tuck them twice and sew them together.
Blouse cut 1.5 cm above the marked line. Open the open ends of the panels face to face on the front and back of the blouse, the lateral edges of the panel are aligned on the side seams of the blouse. Stitch the cloths, slightly stretching the blouseon. Iron allowances up. Tie the knots on one shoulder.PHOTO: JAN SHMIDEL (7), CATWALKPIX.COM (3). IDEA AND EMBODIMENT: DIANE SCHROLL.
Material prepared by Elena Karpova

Pin
Send
Share
Send

Watch the video: DIY ONE-SHOULDER TOP (December 2024).